Daniel lent me his Montero, which has a big cargo space, and fortunately, I was able to pull up onto the sidewalk in front of the Emporium to unload. A passing True Gentleman offered to carry in the bookcase and the toy chest, and I thanked him profusely as I amassed a heap of stuff just inside the front door. Then I parked the car and came back to tote everything back to my space, about 70' from the front door.
Here's what I brought:
- toy box
- a small folding table
- two painted cardboard display boxes for prints and unmatted artwork
- two boxes of autographed books
- a box of large framed art
- a box of prints to put in display box
- a box containing a bird mobile
- step ladder
- printouts of my booth plan and proposed arrangements
- tool caddy containing pliers, scissors, velcro, tape, pegboard hooks, tape measure, paper punch, pen, tags, etc.
It all looked really confusing and imposing at first, so I unpacked the boxes of books into the bookcase to get started, then hung the mobile from a stout wire protruding from a pegboard hole and wired to a pegboard attachment. This mobile gives the booth some movement while being airy enough to not block the view. The birds are computer printouts of a painting I did, glued to black foam board and cut out closely, then hung on brass rods with fishline.
My first casualty was a hanger on the back of a large, heavy painting. The nail head was apparently smaller than the hanger hole, and it pulled out, leaving the hanger attached on only one side. So I unhung the promo piece which had supports UNDER it, and used the hangers for that to support the painting instead.
That left the promo without a hanger, but figured out that I could unhinge one side of the upper two bulldog clamps and hang the piece from that (see the image at left).
I wanted to hang the book display boxes with the attached books/magazines next to their paintings, but the magazine containing one illustration was fragile so I had encased it in a plastic sleeve. At first I had hung it beside its picture, but that put it above eye level and the plastic sleeve glared from the overhead lights (see the glare in the image at right). Putting it below its picture resolved that problem.
Finally I had the main wall tweaked, and worked on the two side walls, putting up a display of prints for sale on one wall and non-illustration personal art on the other.
BTW, regarding business cards, I didn't put any out because I am pretty well booked up and don't really want to solicit work at the moment.
Here's the final result. I had brought the little table to work on, and also had the idea that I MIGHT use it for something, depending on how it looked. I really like it there in the center, even though it isn't doing much.
And it hadn't occurred to me until I was standing there, exhausted, just looking at everything, that if I put the bookcase and toybox/print containers in the corners at 45 degree angles, the booth would look much more welcoming and inviting, sort of like open arms.
So there it is. I think I'll redo the banner later and NOT laminate it. It won't be as sturdy, but it won't glare from the overhead lights, either, which would be better.
I have to go back tomorrow to fix the broken hanger on the picture, and I also think I'll take some Blu-Tack, which is a kind of sticky clay stuff to press under pictures that aren't hanging straight. By tomorrow they should be hanging as crooked as they plan to, and I can straighten them.
I am elated that I managed to pull this thing off without forgetting something major ~ or even minor! This has to be a "first" for me!
If you happen to be in the neighborhood, the Ashland Artisans Emporium is at 1670 Ashland Street, Ashland, Oregon, the main drag coming into town off the freeway. I'm in booth 116, and I hope you will stop by. I won't be there, most likely, but feel free to browse and see first hand how it turned out.
I hope this has been helpful. If you have any questions I might be able to answer, feel absolutely free to comment below and ask! I'm always happy to answer questions.